1.Drying herb: pseudo-ginseng, aniseed, Chinese yam, sea cucumber, honeysuckle ect.
2.Drying agriculture products: dragon fruit flower, rose, mushroom, red pepper ect.
3.Drying fruit: banana, apple , mango, date, wolfberry, lemon, olive ect.
4.Drying seafood: sea fish, shrimp, seaear, cuttlefish ect.
5.Drying tea: puer, red tea, ect.
6.Drying food: noodle, sausage, preserved pork, beancurd sticks ect.
7.Drying incense: incense, mosquito incense ect,
8.Drying wood: redwood, redwood furniture ect.
Chrysanthemum Drying Project
| 1 | Raise the temperature to 65-75°C which will be held for 2-3 hours to remove water, to 35-40°C held for 2-3 hours, 40-45°C held for 8 hours, and finally to 50-55°C held for 8 hours. The first-phase drying process takes 18-20 hours. |
| 2 | Reduce the temperature to 35-40°C held for 3-4 hours. Raise the temperature to 45-50°C held for 15 hours, and to 55-60°C for one hour. The second-phase drying process takes about 19-20 hours. (Note: Make sure that the hot air supply is available all the time and is recorded on an hourly basis.) |
Our products are certified by ISO14001, ISO 9001, CCC, CE and so on.
Main features of Kinkai dryer
1.Energy saving&Environmental protection
Adopt close dehumidify+circulating drying type,saving operating cost;
Without waste gas and waste heat pollution,low noise
2.Running Stable,operating easily
PLC+Touch Screen,running stable,operating easily;
Adopt PLC control,can setting different drying curve,suitable for drying different materials.
3.Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4.Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 20-80ºC.
5.Recovery volatilized component
Some kinds of material contain volatilized component,
In drying processing,hot and wet air will become condenser water then drain,
collect the condenser water so that collect volatilized component
Product Principle
1, Dryer evaporator of refrigerant absorb the air from outside.
2, Then compressor works that make the air temperature rise.
3, Heat exchanger change the hot air into drying chamber.
4, Final materials will be dried by the hot air circulating in drying chamber.
Product Component
Main Engine Component
Technical Parameters
| Single dryer + Drying chamber | ||||
| Model | Unit | JK03RD | JK06RD | JK12RD |
| Power input | KW | 5.5 | 9.5 | 19.4 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ | 380V/3PH,50/60HZ | |
| Rated current | A | 11A(380V),25A(220V) | 19.0 | 39.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
| Max temperature | ºC | <75 | <75 | <75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
| Weight | KG | 180 | 285 | 480 |
| Double dryer + Drying chamber | ||||
| Model | Unit | JK03RD(*2) | JK06RD(*2) | JK12RD(*2) |
| Power input | KW | 11.0 | 18.4 | 32.8 |
| Power supply | V/PH/ HZ | 380V3PH,50/60HZ 220V/1PH,50/60HZ | 380V/3PH,50/60HZ | |
| Rated current | A | 22A(380V),50A(220V) | 37.0 | 66.0 |
| Heating capacity | KW | 21.0 | 42.0 | 84.0 |
| Cooling capacity | KW | 15.6 | 36.0 | 64.0 |
| Dehumidify | L/H | 24.0 | 50.0 | 100.0 |
| Max temperature | ºC | <=75 | <=75 | <=75 |
| Working condition | ºC | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max exhause pressure | Mpa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | <=75 | <=75 | <=75 |
| Power consumption | KWH | 9.6 | 17.0 | 30.0 |
| Electric heater | KW | 6.0 | 12.0 | 24.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1650x856x1280 | 1650x1056x1280 | 2250x1360x1590 |
| Weight | KG | 180(*2) | 285(*2) | 480(*2) |
| Recommend Dryer + Drying Chamber Sizes | |||
| Item | Description | Product Capacity | Drying Chamber Sizes |
| 1 | One unit JK03RD dryer+drying chamber | 300KG/batch | 3160*2070*2200mm |
| 2 | One unit JK06RD dryer+drying chamber | 600KG/batch | 5700*2170*2200mm |
| 3 | One unit JK12RD dryer+drying chamber | 1200KG/batch | 5810*3230*2200mm |
| 4 | Two unit JK03RD dryer+drying chamber | 800KG/batch | 7510*2070*2200mm |
| 5 | Two unit JK06RD dryer+drying chamber | 1500KG/batch | 10530*2170*2200mm |
| 6 | Two unit JK12RD dryer+drying chamber | 3000KG/batch | 10750*3230*2200mm |
If you are interested in our drying machine products, please contact us.